Do
NOT
use damaged pipe
Do
NOT
use Speedfit
®
pipe inserts on low
pressure lines as they create blockages
DO
Cut plastic pipe using a pipe cutter
Do
NOT
use a hacksaw to cut plastic pipe
Pipe Cutter
JG TS
Speedfit
Pipe
Note:
1.707,*655,*;69:(9,56;:<0;()3,-69*655,*;065>0;/*/964,69:;(053,::
PIPEWORK.
Remove any chrome plating on pipework of at least 20mm before inserting this type
VMWPWLPU[V1.MP[[PUNZ
(2>9LJVTTLUK[OL\ZLVMH1VOU.\LZ[JOYVTLWPWLHKHW[VYWHY[UV
6
For Optimum Performance
Important:
For service & maintenance purposes this product must be installed in an
accessible location.
Pipe connections must be easily accessible and a clearance of 100mm around the
base and sides is recommended.
Fixing pump to surface
100mm (4in)
The pump unit must be located on a vertical surface with the
inlet/outlet connections at the bottom of the unit in horizontal
alignment, with the AKW case logo uppermost.
The unit must be located away from the direct line of water jets whenever possible.
DO NOT tile up to the pump unit on the wall, only fix onto surface.
