Remove front cover
with a screwdriver.
Disconnect cable.
Remove pump assembly
from the back plate to
access the fixing holes.
Fit to a finished surface.
Do not tile up to Pump
case.
Using the back plate as a
template mark the fixing
holes. Drill and plug the
wall taking care there are
no hidden cables or pipes.
Use all the screw fixing
positions.
1
2
3
7
Fixing pump to surface
Mount the pump to the
finished surface using all
the wall fixings.
Use the Pump Spacers to
prevent the cables being
trapped.
See pump spacers
installation instructions on
page 13.
4
