Akuvox VP-R49P, User Manual

Page: 107 / 132

Forward Transfer To display and configure Forward setting.
Note : There are three types of forward: Always Forward,
Busy Forward and No answer Forward.

Always Forward: Any incoming call will be
forwarded in any situation. Disable by default.

Target Number: to setup the number you want to
forwarded. When there is an incoming call , the call
will be auto forwarded to the target number.

On Code & Off Code: This code is used to turned
on/off this function on server side.

Busy Forward: An incoming call will be forwarded if
IP phone is busy.

Target Number: to setup the number you want to
forwarded when the phone is busy.

On Code & Off Code: This code is used to turned
on/off busy forward function on server side.

No answer Forward: An incoming call will be
forwarded if it’s no answer after a specific time.

Target number: to setup the number you want to
forward when the phone is no answers with
timeout.

On Code & Off Code: this code is used to turned
on/off the function on server side.
DND DND(Do Not Disturb) allows IP phones to ignore any
incoming calls.

DND Emergency: Enable this function, users can still
receive the call from DND Authorized number when
in emergency situation.

DND Authorized Number: R49P supports multiple
authorized numbers. Please use comma to
separate.

DND Priority: Enable this function. If you enable
DND and Forward function in the same time, the
DND priority is higher than Forward function.

Account: Select a account for DND fun
ction
 DND: Enable this function

Return Code when DND: Determine what response
code should be sent back to server when there is an
incoming call if DND on.

DND On Code: The Code used to turn on DND on
server’s side, if configured, IP phone will send a SIP
message to server to turn on DND on server side if
you press DND when DND is off.

DND Off Code: The Code used to turn off DND on