Akuvox VP-R49P, User Manual

Page: 18 / 132

Parameter specification
：
Parameter Specification
Use PPPOE Check is to enable PPPOE
，
otherwise, disable.
User Name PPPOE account, provided by ISP
Password PPPOE password, provided by ISP
Proceed as follows:
1) Check Use PPPOE
2) Enter the correct user name and password of PPPOE
Note:
1) After dialing, can display the acquired IP address, server IP, the primary DNS,
Secondary DNS information, status as connected
2) Not Dial, IP address information will be 0.0.0.0
3) There is a redial entry under Alternate DNS, click redial, then re-launch a PPPOE
dial-up process, re-dial.
3.2.4 Configuring Wi-Fi
You can select one of the following methods to enter the Wi-Fi configuration:

Mode 1: In the main screen, tap -> Settings-> Wireless & Networks->
Ethernet -> Wi-Fi.

Mode 2:Drag down the status bar, click ->Wireless & Networks->
Ethernet-> Wi-Fi.

Mode 3: Drag down the status bar, click .
Configuration page is shown as below
：