56
Date Format: Determine what format to display on Phone
UI for Date.
Display Mode: Determine what mode to display Time&Date
on Phone UI.
Type
To select how to configure time, it could be set by manually or
get from INTERNET automatically via NTP server.
Manual: To set Time and Date manually.
Auto: To get Time via NTP server.
Note: If you set time to be Manually, it only take effect till next
reboot, after reboot, the phone will switch to Auto mode
automatically, because there is no way for IP phone to record
time during power off.
NTP
To configure NTP server related settings.
Time Zone: To select local Time Zone for NTP server.
Primary Server: To configure primary NTP server address.
Secondary Server: To configure secondary NTP server
address, it takes effect if primary NTP server is
unreachable.
Update interval: To configure interval between two
consecutive NTP requests.
Note: NTP, Network Time Protocol is used to automatically
synchronized local time with INTERNET time, since NTP server
only response GMT time, so that you need to specify the Time
Zone for IP phone to decide the local time.
Daylight Saving Time
To display or configure DST settings.
Note: Here DST, is short for Daylight saving time, which stands
for the time in the summer days when sun rises early will be
adjusted forward to save daylight. The DST will take effects
during the period that set by user. (all the settings for DST are all
self-explanatory, please consult with your administrator for local
DST details).
5.7 Phone-> Preference
Summary of Contents for R55P
