53
Sections
Description
LLDP
To display and configure LLDP settings.
LLDP Active: To enable or disable LLDP feature.
Packet interval: To configure the interval for LLDP
admin message.
Note: LLDP stands for Link Layer Discovery Protocol, it’s
used to exchange device information between any two
directly-connected devices. LLDP is often used to
configure Voice VLAN automatically for IP phone.
Local RTP
To display and configure Local RTP settings.
Max RTP Port: Determine the maximum port that
RTP stream can use.
Min RTP Port: Determine the minimum port that RTP
stream can use.
SNMP
To display and configure SNMP settings.
Active: To enable or disable SNMP feature.
Port: To configure SNMP server’s port.
Trusted IP: To configure allowed SNMP server
address, it could be an IP address or any valid URL
domain name.
Note: SNMP (Simple Network Management Protocols) is
Internet-standard protocol for managing devices on IP
networks.
VLAN
To display and configure VLAN settings.
LAN Port/PC Port: You can configure VLAN setting for
both ports respectively.
Active: To enable or disable VLAN feature for
designated port.
VID: To configure VLAN id for designated port.
Priority: To select VLAN priority for designated port.
Note: Please consult your administrator for specific VLAN
settings in your networking environment.
QoS
To display and configure QoS settings.
SIP QoS: To configure QoS value for all SIP message.
Voice QoS: To configure QoS value for all audio
stream(RTP streams).
TR069
To display and configure TR069 settings.
Active: To enable or disable TR069 feature.
Version: To select supported TR069 version (version
1.0 or 1.1).
ACS/CPE: ACS is short for Auto configuration servers
as server side, CPE is short for Customer-premise
equipment as client side devices.
Summary of Contents for R55P
