![background image](http://html1.mh-extra.com/html/akura/asw8411-160/asw8411-160_user-manual_2886985015.webp)
13
Press
SETUP
on the remote control to enter the
SETUP MENU
Use the
CURSOR
buttons to select
ANALOG AUDIO OUTPUT
and press
The DVD recorder is defaulted to
2CH
(Normal Stereo) to set for Surround Sound select
5.1
and press
Depending upon your type of AV amplifier you will need to select the type of output from
Use the
CURSOR
buttons to select
SPDIF Output
and press
. There are two
LCPM
and
RAW
. If your AV amplifier has a built in decoder select
RAW
if it has no built in decoder select
LCPM.
If
LCPM
is selected you may select two different “BIT” rates
48K
bits /sec and
96 K
You will need to check the specification of your AV amplifier to select the correct level.
4.6 TV Channel Setup.
Before you search and store TV channels on this appliance, ensure that a good aerial system is connected.
remember the quality of the signal affects the quality of recordings.
AUTOSEARCH
Press the SETUP button to enter the SETUP MENU
Use the
CURSOR
buttons to select
RECORDING
menu and press
Use the
CURSOR
buttons to select
COUNTRY SELECTION
and press
Use the
CURSOR
buttons to select the correct country (
United Kingdom
) is default
Use the
CURSOR
buttons to select
AUTO SCAN CHANNEL
and press
A message will ask you if you wish to continue, use the
buttons to select
OK
or
CANCEL
.
A Message
SCAN CHANNELS
will display “
Default TV System
”. It will display “
PAL “I”
by default, select continue and press
A display will show how many channels are found. Leave this to complete. If you wish
to
STOP
the search.
.
When search is complete the recorder should display BBC1, BBC2, ITV, CH4 and CH5
not the case, exit the AutoScan menu and enter the
MODIFY CHANNEL
menu.
MODIFY CHANNEL
Exit all menu’s and select the programme you wish to edit (
P002
)
Press the
SETUP
button to enter the
SETUP
menu
Use the
CURSOR
buttons to select
RECORDING
menu and press
Use the
CURSOR
buttons to select
MODIFY CHANNEL
and press
Use the
CURSOR
buttons to select
CHANNEL
and press
The first item to be selected is
“C
”, this denotes an “
Off air
” channel , “
S
”
denotes a “
Cable channel
”
Use the
buttons to select the first Digit. To change the value use the
buttons.
second digit repeat. Press
and the Recorder will switch to the
If more than one channel is incorrectly numbered you will have to repeat from the start,
until the stations are in the correct locations.
the DVD recorder.
options
,
bits /sec.
Please
and press
and press
to discontinue press
in that order. If this is
To change the
channel number you selected.
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
4.5.Setting the Digital Audio Output
You can use this setting to modify the digital audio output to the AV receiver depending on whether
it includes its own digital multi-channel sound decoder.
Summary of Contents for ASW8411-160
Page 7: ...5...
Page 39: ...74 G070113A AR...