Akura ASW8411-160, User Manual

Page: 18 / 39

16
Note:
Ifyou have changed the source of video,the time shofting buffer will be erasd.
Note:
During Time shifting,a Timer recording(programmed recording)may come up.Asyou can not watch
one program in Time shifting and another channel,the DVD Recorder will prompt you to confirm if you want
to keep the current channel or proceed with Timer recording.lf there is no response,the DVD Recorder
assumes Timer recording should be started.The message will appear 2 minutes before the timer recording is
due.
Time shifting is stored in a buffer that contains 60 minutes of recording.After 60 minutes,the buffer will
be progressively overwritten.lf you need to keep the video contained in this buffer for future usage,you
can save all or part of the buffer.
6.1.Save
ln order to save from within Time shifting buffer,two options are available:
Save Option 1. While viewing a program, press Rec, this will start saving the segment you are watching,
you can navigate forward. During the saving operation, by pressing Rec, you will increase the length of the
program you are saving by 30 minutes up to a maximum of 3 hours. Press STOP to indicate the end of the
saving operation. The saved part of the time shifting buffer will be tagged in red color.
is stored in
you need to buffer for
.
.
Save Option 2. While viewing a program,press and hold down for 2 seconds.This will save the entire
Time shifting buffer.If is pressed, the saving will terminate at that point in the buffer. During the
saving operation,by pressing ,you will increase the length of the program you are saving by 30
minutes up to a maximum of 3 hors.press and hold for 2 seconds if you want to cancel the entire
saving operation.
You can not change the channel or the source if saving is on-going(the end of the recording segment
is either not entered,or in case of long recording ,it has no been reached),saving has to be manually
stopped first (by pressing ). The DVD Recorder will prompt you to stop saving first, the segment
will be saved on HDD and then channel or source change will be performed.
Only one segment in the Time shifting buffer can be identified for saving,it is not possible to
identify multiple segments.Once the segment has been saved and registered in Title list,then this segment
30
in the buffer can
(And its preceding video part )will be removed from the Time shifting buffer.
lf you are using, you can only save a segment which is
entirely from the same source and channel.ln other words,you can not save part of one channel and part of
a subsequent channel,in this case,Save option 2 is not supported.
If you have defined a save segment and continue time shifting,you can still navigate inside the time
shifting buffer and view the segment that has been tagged for saving as long as the live recording has not
caught up the beginning of the segment to be saved. The saved program will be removed from the
.
of
the
Rec
Stop
Rec
Stop
STOP
Note:
Note:
Note:
Setup->HDD->Timeshift Buffer->Preserve