securityProbe 5ESV Manual
Updated until firmware 404m
- 46 -
3) Notifications
If you setup a notification you can define the action to take when the sensor gives a reading
beyond your previously set thresholds. This allows you to determine how you will be notified that
a sensors reading has reached the specified parameters (high warning, critical etc) that we
looked at in the previous section.
1. Adding a notification
a)
First click on the “notification wizard”
b)
You will now have the notification wizard page displayed, shown on the next page.
This tutorial provides you the information needed to setup a notification.
To get to the starting point of this tutorial:
Login as administrator
Click the “Notifications” tab
