securityProbe 5ESV Manual
Updated until firmware 404m
- 29 -
Data Collection Type:
This refers to the data collection from the sensor and how the data is then displayed on
the graphs.
There are three options for the collection of data. Average, Highest and Lowest. The
default setting is “Average”.
When the data collection type is set to “Average” the output g
raphs for the daily,
monthly, and yearly all have the same size on the screen. For the daily graph, each data
point on the graph is one data point collected from the sensor. But for the monthly and
yearly graph, in order to display more data into the same size as the daily graph, some
consolidation on the data is needed. One data point on the monthly and yearly graph is
an average of the sensor data in a range.
The maximum and minimum values showing on the monthly and yearly graphs are the
value of this consolidated data and not the raw data over that period of that time.
The When the Data Collection Type is set to the Highest setting then you will get the
graphing output displaying the sensors highest reading. This is the same for the Lowest
setting.
