securityProbe 5ESV Manual
Updated until firmware 404m
- 15 -
4. Multi-users and groups setup
Login to the securityProbe or securityProbe 5E with the Administrator password, the
default will be “public” if you have not changed this yet.
Click on the Settings page, then System Administrator then User & Group Management
as shown in the screen shot below:
Note
:
The following screen shots may appear small and hard to read. Please use the
zoom feature in your PDF reader program to increase the size of the page to better view
these screen shots.
Group Setup
This will take you to the Groups page shown below:-
Now click on the “Add” button to add your groups as shown in the screen shot above.
