OZZIE™ PORTABLE OSCILLATING
MONITOR - STYLE 911
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
INTENDED USE:
The Ozzie monitor is designed to operate as a portable oscillating water monitor intended to provide efficient trouble-free
operation for fire fighting applications. The Ozzie monitor is intended to be deployed for unmanned operation. The
following instructions are provided to assist in obtaining the best possible performance from this unit. Read and
understand these operating instructions before use.
PRODUCT RATINGS:
Mass:
29.5 lb. (13.4 Kg)
Maximum Flow:
375 gpm (1420 lpm)
Maximum Pressure:
150 psi (1020 Kpa, 10.2 bar)
Minimum Pressure:
70 psi (483 Kpa, 4.8 bar)
Maximum Hose Diameter:
3 inch (76 mm)
Noise Emission:
82 Db at 1m
PRODUCT WARNING:
WARNING:
For firefighting use only by trained firefighters.
WARNING:
Charge the unit slowly. Rapid charging many cause a pressure surge with the potential to cause an
injury or damage the unit.
WARNING:
Aim the unit in a safe direction before pumping water through it.
WARNING:
Replace the identification tag and warning tag if they should become worn or damaged.
WARNING:
Do not exceed the maximum pressure or flow ratings of the monitor. Exceeding these ratings may lead
to an injury or may cause damage to the monitor.
WARNING:
Do not install shut-offs on the outlet of the Ozzie monitor. Shut-offs may cause pressure surges with the
potential to cause an injury or damage the product.
WARNING:
Drain the unit after use to prevent freeze damage.
WARNING:
Ensure the thread on the nozzle matches the Ozzie monitor outlet threads. Do not over tighten.
WARNING:
Keep all personnel out of the danger zone (Figure 1), in front of the outlet of the monitor when the water
source is attached. Dangerous flow velocities can cause serious injury.
101908
