FS100™ PORTABLE SPRAYER SYSTEM
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
FSG-MNL-00219
Akron Brass, Inc.
343 Venture Blvd.
Wooster, OH 44961
14
5.
GENERAL OPERATION
Before starting operation, a nozzle should be selected based upon the desired application. The
system includes three different styles and they can easily be swapped out by using a wrench.
Refer to the Wand Nozzle Tip Selection part of the Initial Unit Setup section.
1. COMMISSIONING
REVIEW ALL SAFETY WARNINGS IN THE
MANUAL BEFORE OPERATING THE UNIT
BEFORE USING THE UNIT, THE USER MANUAL
SHOULD BE READ AND THE UNIT NEEDS TO BE
PUT INTO SERVICE BY HOOKING UP THE PROPER
AGM BATTERY, PRIMING THE UNIT, AND
TESTING OPERATION.
THE LABEL ON THE TANK HAS A PLACE TO
WRITE DOWN THE CHEMICAL CURRENTLY IN
USE AND THE DATE ADDED.
2. SURFACE PREP
CLEAN HEAVILY SOILED AREAS WITH SOAP AND
WATER FIRST BEFORE DISINFECTING, PER
RECOMMENDATION OF THE AREA HAVING
JURISDICTION (AHJ).
3. SAFETY REQUIREMENTS
ONLY USE THIS PRODUCT WITH APPROVED
DISINFECTANTS SUITABLE FOR USE WITH THE
FS100.*
REFER TO THE SDS SHEETS AND AUTHORITY
HAVING JURISDICTION (AHJ) FOR THE PROPER
PPE, CONCENTRATION, AND APPLICATION
METHODS.
*refer to active ingredient compatibility list in
the FS100™ user manual
