FS100™ PORTABLE SPRAYER SYSTEM
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
FSG-MNL-00219
Akron Brass, Inc.
343 Venture Blvd.
Wooster, OH 44961
16
6. POWER REQUIREMENTS
THE SYSTEM EITHER OPERATES FROM THE
INSTALLED 12VDC BATTERY OR WHEN PLUGGED
INTO A STANDARD GFCI 120VAC OUTLET VIA
THE INTEGRATED BATTERY CHARGER.
UNIT SHOULD BE TURNED OFF WHEN NOT
SPRAYING.
7. TURNING THE SYSTEM ON
SYSTEM IS TURNED ON VIA THE ON/OFF
SWITCH.
THE PUMP WILL PRESSURIZE THE FLUID, WHICH
CAN BE EXPELLED VIA THE TRIGGER ON THE
WAND.
8. APPLYING THE PRODUCT
ENSURE THE WORK AREA IS WELL VENTILATED
IN ACCORDANCE WITH OSHA, NIOSH, OR AHJ
STANDARDS.
APPLY PRODUCT TO THE SURFACE USING SLOW
AND SMOOTH SWEEPS TO WET, BUT NOT
SATURATE THE SURFACE.
USE THE EPA GUIDANCE IN ORDER TO
DETERMINE PROPER CONTACT TIME FOR
DISINFECTION.
THE WAND TRIGGER CAN CREATE A PINCHING
HAZARD. USE GLOVES OR GRIP THE TRIGGER
NEAR THE BOTTOM WHEN APPLYING THE
PRODUCT.
