Configuration of the Receiver
15 (28)
Sesam 800 L99 RX/RXD/RX DIN (original instructions)
Document-ID: 942858-000 EN
Version: C1
Author: SH
10.3.4
Re- configuring a Transmitter in the Receiver SESAM 800 RXD
If the user attempts to program a transmitter that is already programmed in the
receiver, the display will show “
E r r 1
” followed by the original memory
position on the display.
Erase the original memory position before proceeding with the configuration.
10.3.5 PIN Lock in the Receiver SESAM 800 RXD
The Sesam 800 RXD can be protected from unauthorized configuration by us
-
ing a 4-digit PIN-code.
When a PIN-code is configured, all buttons on the receiver are locked except
the button used to enter the code (Enter button).
To configure the PIN-lock do the following:
1. Power on the receiver.
2. Press the Enter button and hold it down for 5 seconds. The display should
now show “Pin new” followed by “_ _ _”. If the user is inactive for more
than 10 seconds in the PIN configuration mode the receiver will return to
normal operations.
3.
Enter the first digit of the code by using the ‘+’ and ‘-‘ buttons. Press the
‘Enter’ button when finished.
4. Repeat the above step for digit 2...4.
5.
When all 4 digits are entered the display will show ‘rpt’ (repeat). The code
must be repeated to be accepted. Enter the code once more.
6.
If the code is entered successfully the display will show ‘Sto’ (stored).
The receiver will automatically be locked after 10 seconds of button inactivity. The
display will show “LOC” when the receiver switches to locked mode.
