Configuration of the Receiver
13 (28)
Sesam 800 L99 RX/RXD/RX DIN (original instructions)
Document-ID: 942858-000 EN
Version: C1
Author: SH
10.2 Sesam 800 RX DIN
10.2.1
Basic Configuration
1. Choose the door number that shall be used (0-999) and enter the number on
the transmitter.
2. Press the Learn/Erase button on the receiver until LED 7 is ON. The Learn
Mode will be active for 10 seconds (as long as LED 7 is ON).
3.
Press UP on the transmitter, LED 7 flashes 3 times if the Learn is successful.
10.2.2
Erasing All Transmitters in the Receiver SESAM 800 RX DIN
1. Press the Learn/Erase button until LED 7 is ON. The Learn Mode will be
active for 10 seconds.
2. Press the Learn/Erase button for 5 seconds (until LED 7 is OFF).All trans-
mitters are now erased from the receiver memory.
10.3 Sesam 800 RXD
10.3.1
Basic Configuration
1. Choose the door number that shall be used (0-999) and enter the number on
the transmitter.
2. Press the “Learn/Erase” button.
The display window shall show “
L r n
” followed by the memory position
that the transmitter will be stored in.
The right decimal on the display flashes as long as the Learn mode is active
(10 seconds).
3. Press ARROW UP on the transmitter.
The display shows “
A
” if the learn process is successful and the receiver
will return to normal operating mode automatically. The display will now show
the new door number.
