45
■
Using “Display Adjustment”
Press
Menu
button, and then press or button until the “Geometric” menu appears.
Press or button to highlight the item.
Press
Enter
button to confirm for sub-selection as shown in the table below.
Press
Enter
button to confirm your selection.
Press button to return.
Items
Description
Vertical
Position
Use “ ” or “ ” to select it and press “
ENTER
” to confirm.
Use “ ” or “ ” to move the image up or down.
Horizontal
Position
Use “ ” or “ ” to select it and press “
ENTER
” to confirm.
Use “ ” or “ ” to move the image left or right.
Table of Display Adjustment
■
Selecting Channel
Press
Ch /
button on the remote control to search the channels, the channel
number will increase or decrease by 1 for each pressing excluding the skipped
channels.
Press number buttons
0~9
to select the corresponding channel content. If the
channel number is bigger than 9, just press the two number buttons successively. If
the channel number is bigger than 100, just press the three number buttons
successively. The time interval should not exceed 2 seconds.
If the channel number you pressed is bigger than the maximum channel number that
the setting is permitted, the maximum numbered channel content will be remained.
■
Channel Preview
Press
Recall
button to switch between present channel and previous channel. (Only for TV)
Press
Menu
button, and then press or button until the “Geometric” menu appears.
Press or button to highlight the item.
Press
Enter
button to confirm and display a status bar as below.
Press button to decrease the menu clock. Press button to increase it.
Press
Enter
button to confirm and return.