42
5 Using the Geometric Menu
Option
Press
/
Description
Contrast
0~100
Reduce/Enhance
Brightness
0~100
Darken/Brighten
Back Light
Middle, Bright, Dark
Adjust the balance of back light
Auto Setting
To adjust the position of
display automatically
Phase
0~31
Soften/Sharpen
Manual Clock 0~255
Decrease/Increase
Display
Adjustment
Vertical position,
Horizontal position
To adjust the position of
display
Note:
If your current input source is “VGA” , push
Menu
button
enter into this menu. It is
not available in other input source mode.
Contrast, Brightness can be adjusted only if picture mode is in USER mode. When
smart picture mode is pre-set, the value of the above settings will be different
according to different input source.
Press
Menu
button on the remote control, and then press or button until the
“Geometric” menu appears.
Press or button to highlight the item.
Press
Enter
button to confirm and display a status bar as below.
Press button to decrease that will soften the color. Press button to increase
that will make white area more bright.
Press
Enter
button to confirm the adjustment and return.
(Continued on next page)
■
Using “Contrast”
■
Using “Brightness”
