manualshive.com logo in svg

Akai DPS24, Reference Manual

Share
Download
Akai DPS24 Reference Manual Download Page 88

  

User Guide

74

EDIT MODE

Those options are the same as in the EXPORT REGION screen and are duplicated here for
convenience.

Also shown in the lower part of the display are:

Edit Tracks graphic :

shows which tracks are going to be exported

Free :

shows the available space on the Destination disk

Size :

shows a calculation of the total export size

The export size is recalculated in real-time as the region selection (IN/
OUT points, Edit Tracks), Export Region and Type parameters are
changed. This way, you always know whether the current selection is
going to fit on the Destination disk or not.

Details:

shows the Sample Rate and Bit Depth settings of the current Project.

NOTE: 

When exporting, please note that the sample rate/bit depth of exported files is always defined

by the current Project settings.

Name:

shows the export name (defaults to <auto>)

Export files can be either explicitly named or auto-named.

The NAME key [F2] can be used to enter a specific name. If left blank, it
returns to auto-naming.

For named MONO or STEREO exports, the resultant filename has the
track number appended.  Since MULTI-CHANNEL export will always
generate a single file only, nothing is appended to the name.

For auto-named MONO or STEREO exports, the resultant filename is
the Channel Name of the track (STEREO exports use the left channel
and remove 'L', if present, from the end of the Channel Name).

For auto-named MULTI-CHANNEL exports, the resultant filename is
simply the Project name.

Examples:

1. Named export 'Test Export' of tracks 1, 2, 3, 7, 11 (with tracks 1 + 2 paired):

MONO

STEREO

Test Export 01.wav

Test Export 01.wav  (stereo file)

Test Export 02.wav

Test Export 03.wav

Test Export 03.wav

Test Export 07.wav

Test Export 07.wav

Test Export 11.wav

Test Export 11.wav

MULTI-CHANNEL

Test Export.wav  (5-channel file)

2. Auto-named export of tracks 1, 2, 3, 7, 11 (with tracks 1 + 2 paired):

MONO

STEREO

Guitar 1 L.wav

Guitar 1.wav  (stereo file)

Guitar 1 R.wav

Synth FX.wav

Synth FX.wav

Lead Guitar.wav

Lead Guitar.wav

Vocal.wav

Vocal.wav

MULTI-CHANNEL

Really Cool Project.wav (5-channel file)

Summary of Contents for DPS24





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands