manualshive.com logo in svg

Akai DPS24, Reference Manual

Share
Download
Akai DPS24 Reference Manual Download Page 105

91

  

User Guide

GROUPS

Under the FX/AUX send section, you can see the group assignment for
the selected channel. These may be changed in the PATCH pages or
more conveniently directly on the console using the ASSIGN keys.

The soft key functions on the CHANNEL EQ page are:

EXIT [F1]

Takes you back to the main MIXER page.

UTILS [F2]

Takes you to the Mix Channel Utilities page (see below)

DYN [F3]

Takes you to a page where you can set the channel's dynamics proces-
sors (see below).

FLAT EQ [F4]

Will flatten the EQ but will leave other channel parameters intact.

EQ:ON/OFF [F5]

Allows you to toggle the EQ  ON/OFF.

LIBRARY [F6]

Takes you to the EQ Library page. (see below)

Pressing UTILS [F2] takes you to the Mix Channel Utilities page:

NAME

Pops up a prompt where you can name the selected channel in the usualway.

COPY

Allows you to copy the settings of one channel to another.

RESET

Will initialise the selected channel(s) parameters to flat settings.

CHANNEL

Summary of Contents for DPS24





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands