manualshive.com logo in svg

Akai DPS24, Reference Manual

Share
Download
Akai DPS24 Reference Manual Download Page 44

  

User Guide

32

MAIN CONTROL SECTION

MAIN CONTROL SECTION

Here, you find the following functions:

EXT SYNC

This allows you to synchonize the DPS24 with external devices.

When the key is pressed (and the LED illuminated), it enables the Time
Sync synchronization setting  (Master or Slave, MIDI or SMPTE).

If Time Sync is set to MTC Slave or SMPTE Slave, the DPS24 will not
play and/or record unless it is receiving external timecode.

If Time Sync is set to MTC Master or MIDI Clock Out, sync will not be
sent to the MIDI output unless the EXT SYNC key is enabled.

It's SHIFT function allows you to set a timecode offset.

MAIN SCREEN

This is the main operating screen that one normally works in.

It shows the project name, meters and an overview of the project.

It's SHIFT function (GRID) shows an enlarged project display.

EDIT

Allows you to edit audio with functions such as copy, cut, paste, etc..

This mode's SHIFT function gives access to the DPS24's off-line DSP

functions such as timestretch, pitch shift, etc..

MIXER

Allows access to Mixer and Channel views, Solo and FX/AUX  setup.

Its SHIFT function shows the PATCH pages where you may route sig-
nals within the DPS24.

AUTOMATE

Provides access to the DPS24's automation functions.

FX

Takes you to the effects pages where you may select and edit the DPS24's
internal effects.

Summary of Contents for DPS24





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands