manualshive.com logo in svg

Akai DPS24, Reference Manual

Share
Download
Akai DPS24 Reference Manual Download Page 151

137

  

User Guide

COMBINED

Those effects combine a modulation effect (Chorus, Flasger or Phaser) and a Delay.

The parameters are :

• Rate

(0.1Hz - 10.0Hz)

Adjusts the speed of LFO for the modulation effect

• Depth

(0% - 100%)

Adjusts the depth of LFO for the modulation effect

• Fdback

(0%

 - 

100%)

Adjusts the feedback amount of the modulation effect

• Delay

(1ms - 1500ms)

Adjusts the delay time of the delay effect

• Fdback

(0% - 100%)

Adjusts the amount of the delay effect feedback

• Bounce

(ON/OFF)

Sets whether the delay sound is panned (ON) or not

CHORUS > DELAY

This effect consists of a chorus effect and a delay effect connected in series.

FLANGE > DELAY

This monaural effect consists of a flanger effect and a delay effect connected in series.

PHASER / DELAY

This monaural effect consists of a phaser effect and a delay effect connected in series.

COMBINED

Summary of Contents for DPS24





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands