manualshive.com logo in svg

Akai DPS24, Reference Manual

Share
Download
Akai DPS24 Reference Manual Download Page 50

  

User Guide

38

MIX SCENE KEYS

Pressing F3 or F4: RESET MIXER resets the mixer to its default configuration.

The default mixer settings applied when RESET MIXER is used are as follows:

• Faders / Mute:

- INPUTS:

0dB,

CH ON

- TRACKS:

0dB,

CH ON

- GROUPS:

0dB,

CH ON

- FX RETURNS:

0dB,

CH ON

- FX/AUX SENDS:

0dB,

CH ON

- AUX IN:

-120dB,

CH ON

- MASTER:

0dB,

• 

Pan: All Pan centered

• 

All Mono Channels (INPUTS and TRACKS):

- EQ ON, FLAT EQ

- DYN OFF

- SENDS 1-4: GLOB, POST, -120dB

• 

FX RTN Channels:

- SENDS 1-4: OFF, POST, -120dB

• 

L/R ASSIGN:

- TRACKS and FX RTNS:

L/R

- INPUTS and GROUPS:"---" (not assigned)

• 

GROUP ASSIGN: all signals"---" (not assigned)

• 

FX/AUX SETUP:

- 4 x MONO

- FX 1-4

• 

MIDI CHANNELS:

- Fader: OFF, Controller 007, default value=104

- Pan: OFF, Controller 010, default value=64

• 

FX:

- MBCX: OFF

- FX1: ON, Big Hall

- FX2: ON, Stereo Delay

- FX3: ON, Stereo Chorus

- FX4: ON, Pan Phaser

• 

INPUT ROUTING:

- INPUT SOURCES:ADC 1-12

- FX RTN SOURCES:FX 1-4 L+R

Summary of Contents for DPS24





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands