AK-NORD XT-PICO-XXL, Manual

Page: 31 / 39

SETUP TTL IO
1=Emulation: =
The following emulations can be used:
MODEM,EMAIL,TCPCLIENT,UDPCLIENT,UDPSERVER,TCPSERVER
Please find examples of applications and detailed explanations regarding
emulations in the main manual of the AK XXL products.
2=Emucode: =
for customer-specific functions
3=BUS =
TTLIO
Each bus can be reconfigured by entering an admissible value as for example
“RS232, RS485, I2C, SPI, LCD, SDCARD or DFCARD“ in the menu item “BUS”.
However, it is only possible to activate and configure the selected BUS after
resetting.
4 = Local Port: =
Here you can define the TCP/IP or UDP port, which is approved for the
corresponding serial interface.
If you enter here 23 (Telnet) or 80 (Browser), the device can no longer be
configured via this service. But the output of the data (requests) of browser or
Telnet will be performed directly via the serial interface.
5 = Local SSL Port:=
Has got the same function as the Local Port, but it is used for encoded SSL
communication
All other menus are described in the main manual of the AK XXL products.
PIN1 = HIGH
PIN2 = HIGH
PIN3 = HIGH
PIN4 = HIGH
PIN5 = LOW
PIN6 = LOW
PIN7 = LOW
PIN8 = LOW
=========================== CONFIG MENU =====================================
1 = Emulation = TCPSERVER
2 = EmuCode = 0000
3 = BUS = TTLIO
4 = Local Port = 1002
5 = Local SSL Port = 0
STATE=HW ONLINE
PIN1 = HIGH
PIN2 = HIGH
PIN3 = HIGH
PIN4 = HIGH
PIN5 = LOW
PIN6 = LOW
PIN7 = LOW
PIN8 = LOW
For example:'4=1002'
-----------------------------------------------------------------------------
[Q = QUIT] Please enter your choice:
Here the current status of the TTL signal line is shown