AK-NORD XT-PICO-XXL, Manual

Page: 33 / 39

1 = PIN1 Direction I/O= I
2 = PIN2 Direction I/O= I
3 = PIN3 Direction I/O= I
4 = PIN4 Direction I/O= I
5 = PIN5 Direction I/O= I
6 = PIN6 Direction I/O= I
7 = PIN7 Direction I/O= I
8 = PIN8 Direction I/O= I
a = PIN1 Value H/L = H
b = PIN2 Value H/L = H
c = PIN3 Value H/L = H
d = PIN4 Value H/L = H
e = PIN5 Value H/L = H
f = PIN6 Value H/L = H
g = PIN7 Value H/L = H
h = PIN8 Value H/L = H
=========================== TTL-IO Config Menu ==============================
1 = PIN1 Direction I/O= I
2 = PIN2 Direction I/O= I
3 = PIN3 Direction I/O= I
4 = PIN4 Direction I/O= I
5 = PIN5 Direction I/O= I
6 = PIN6 Direction I/O= I
7 = PIN7 Direction I/O= I
8 = PIN8 Direction I/O= I
a = PIN1 Value H/L = H
b = PIN2 Value H/L = H
c = PIN3 Value H/L = H
d = PIN4 Value H/L = H
e = PIN5 Value H/L = H
f = PIN6 Value H/L = H
g = PIN7 Value H/L = H
h = PIN8 Value H/L = H
For example:'1=I'
-----------------------------------------------------------------------------
[Q = QUIT] Please enter your choice:
Using these settings, it is possible to
determine if the single PINs shall act as
input or output when starting the interface.
It is also possible to set this function via the
protocol during operation. Please find an
explanation on the following pages.
Using these settings, it is possible to
determine if the single PINs are HIGH or
LOW when starting the interface. This
function can also be changed via the
protocols during operation. Please find an
explanation on the following pages.