AK-NORD XT-PICO-XXL, Manual

Page: 27 / 39

a=Emulation: =
The following emulations can be used:
MODEM,EMAIL,TCPCLIENT,UDPCLIENT,UDPSERVER,TCPSERVER
Please find examples of applications and detailed explanations regarding
emulations in the main manual of the AK XXL products.
b=Emucode: =
for customer-specific functions
c=BUS =
SPI
Each bus can be reconfigured by entering an admissible value as for example
“RS232, RS485, I2C, SPI, LCD, SDCARD or DFCARD“ in the menu item “BUS”.
However it is only possible to activate and configure the selected BUS after
resetting.
e = Local Port: =
Here you can define the TCP/IP or UDP port, which is approved for the
corresponding serial interface.
If you enter here 23 (Telnet) or 80 (Browser), the device can no longer be
configured via this service. But the output of the data (requests) of browser or
Telnet will be performed directly via the serial interface.
f = Local SSL Port:=
Has got the same function as the Local Port, but it is used for encoded SSL
communication
All other menus are described in the main manual of the AK XXL products.