T-TAP Pro Thunderbolt 3 to 12G-SDI/HDMI v16.1 21 www.aja.com
RGB Range
The RGB Range pulldown menu allows you to select either Full range (0-1023) or
SMPTE range (typically 64-940) for RGB color output.
NOTE: The AJA Control Panel software uses the abbreviation “sf” instead of “PsF” when
referring to “progressive segmented frame” formats. In the manual and in other
literature you may see either of these acronyms used interchangeably. Visually it
is easier to discern at a glance if you are working with progressively segmented
frame formats (sf in the AJA Control Panel) as compared to progressive frame
formats which will show only “p.”
SDI Output Screen
The SDI Out screen shows the current settings for the SDI output.
Output Options
Select
• Auto - Automatically selects the output format, based on the input or selected
format.
• Device Format - Selects the framebuffer format for output.
Color Space
Sets the color space. Select from Auto, YUV, or RGB.
RGB Range
Sets the RGB range. Select from Auto, SMPTE, or Full.
3G Transport
Sets the output transport. Select from:
• Auto - Auto selection based on input or selected format
• 3Gb - Single link HD output using one BNC. The Level B-DS format is the dual-
stream carriage of two independent HD-SDI/SMPTE 292M signals (720p up
