AJA KONA 4 Installation And Operation Manual Download

Page: 4 / 89

KONA Capture, Display, Convert v15.2 4

www.aja.com

Control Panel 4K/UltraHD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Control Panel 8K Operation (KONA 5 only) . . . . . . . . . . . . . . . . . . . . . . 69

Format Screen in 8K Mode (KONA 5 only) . . . . . . . . . . . . . . . . . . . . . 70

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

About 8-bit Versus 10-bit Video.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   70
About 12-bit Video .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   71
About RGB and YPbPr Video.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   71

Appendix A – Specifications . . . . . . . . . . . . . . . . . . . . . . . . 72

KONA 5 Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
KONA 4 Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
KONA 1 Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Appendix B – Safety & Compliance. . . . . . . . . . . . . . . . . . . . 79

Warranty and Liability Information . . . . . . . . . . . . . . . . . . . . 86

Limited Warranty on Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Governing Law and Language; Your Rights. . . . . . . . . . . . . . . . . . . . . . 87

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Summary of Contents for KONA 4


























































































Search results

Summary of Contents for KONA 4

Reviews:

Related manuals for KONA 4

Brands by name

Popular brands

AJA KONA 4, Installation And Operation Manual

Search results

Summary of Contents for KONA 4

Reviews:

Related manuals for KONA 4

Brands by name

Popular brands