KONA Capture, Display, Convert v15.2 58 www.aja.com
• c:\Users\<username>\AppData\Local\AJA\Control Panel\<device name>
Presets\ [Windows 8]
Reset to Default
When you click the ‘Reset to default’ button the control panel will delete the
User’s preference file and do one of the following:
• If “Shared” preferences exist, they are reloaded and the device is set to this
state.
• If the “Shared” preferences file does not exist, “factory defaults” are loaded
and the device is set to this state.
Erase all Prefs
For technical support purposes you may be required to remove Preference
settings. This button automates that function. If activated, all your preference
setting will be lost.
For more information on Preset preferences see
"Single-User & Shared Preferences"
Firmware Screen
Use the Firmware link to access the firmware update/changeover screen.
For the KONA 4, the Desired pulldown menu allows you to select either:
• UFC Mode—supports SD, HD, and 2K formats (allows up/down/cross-
conversion).
• 4K Mode—supports SD, HD, 2K and UltraHD (3840x2160) and 4K (4096x2160)
formats (disables up/down/cross-conversion)
Click
Install
to erase the current firmware and load the desired firmware.
You will be required to power-cycle your computer to finish the changeover.
See
"Firmware Update Procedure" on page 23
for details.
