AJA Ki PRO ULTRA, Installation & Operation Manual

Page: 41 / 98

Ki Pro Ultra v1.2r1 www.aja.com 41
16.1 FORMAT MEDIA
This parameter is used to format the currently selected media using the file system type
selected in the previous menu.:
16.2 DELETE CLIPS
This parameter can be used to delete all of the clips on the media. These are the options:
Ki Pro Ultra media can be used to hold data other than Apple ProRes QuickTime
recordings. If other files are saved to the PAK media, they should be placed outside of the
“AJA” folder. Any material inside of the “AJA” folder will be erased if a MEDIA>Delete
Clips>DELETE ALL is performed.
16.25 DELETE CURRENT
CLIP
This parameter can be used to delete the currently selected clip on the media (see the
bottom display for clip name). These are the options:
17.0 PRESET REEL
NAME
This parameter determines the reel name associated with all clips generated while using
this setting. These are the options:
The reel name is a number between 001 and 999. It is historically linked to the naming
conventions used for film and tape-based media. The REEL NAME is an incrementing
three digit value that works with EDLs. For this reason, the parameter does not have a
“NONE” selection—all clips will be associated with a REEL NAME. The REEL NAME
parameter determines the name that the media will have if it is formatted and will appear
when the media is mounted on a computer.
17.1 UNIT
DESIGNATION
This parameter defines a letter designation for recordings when using the 17.7
Combined Name menu parameter.
• A to Z – Selects a value between A and Z
NOTE: The Unit name is not part of a clip name unless the 17.7 Combined Name menu
parameter is enabled.
CANCEL (default)
Format Media No action (do not format the media selected)
Format the selected media: press Control Knob and CONFIRM
ACTION to Format the media)
KEEP CLIPS (default)
DELETE CLIPS No action (do not delete clips)
Press Control Knob and CONFIRM ACTION to Delete all clips on
the storage device
KEEP CLIPS (default)
DELETE SELECTED CLIP No action (do not delete the selected clip)
Press Control Knob and CONFIRM ACTION to Delete this clip
from the storage device
001 to 999
(default = 001) Press Control Knob and scroll up or down to change the REEL
NAME value from 001 to 999.
SELECT A USER
DESIGNATION LETTER
Press Control Knob and scroll to the desire alphabetic letter
(A – Z) your unit designation. Press the knob again to select.