AJA Ki PRO ULTRA, Installation & Operation Manual

Page: 14 / 98

Ki Pro Ultra v1.2r1 www.aja.com
14
Controls
Figure 2. Ki Pro Ultra Operator Side Controls
Front Panel
The Ki Pro Ultra front panel includes:
• Transport controls
• Headphone volume control and headphone jack
• Multi-purpose User Control Knob for jog and selection functions
• Large 1280 x 720 TFT LCD display with Video Monitor and Menu/Status Overlays
• Additional selection buttons to quickly access the overlay display modes:
• Configuration menus
• Status display
• Video monitor overlay display options
• Media management
Buttons
Power ON/OFF Button: Controls system power ON/OFF and shows when power is ON (when illuminated) or OFF.
NOTE: When power is first applied to Ki Pro Ultra, the unit powers up immediately (without pressing
the button. This facilitates a quick return to operation if there is a power interruption.
In normal operation to turn power on, press the button once. It isn’t necessary to press
hard—it’s a “soft” button sensed by the processor inside. Pressing the button will begin
power-up and display start-up progress on the alphanumeric display.
To power down, press and hold the power button down for 3 seconds while the display
counts down. This process prevents accidental power-off during normal operation. You
can abort the power-down process by simply removing your finger from the power
button before the 3 seconds have elapsed.
Two PAK
Media Slots
User Control Knob
Headphone
Jack
Status overlay
PAK Media
Cartridges
PAK Media
Slot Eject
Button
Power
On/Off
Transport Control
Buttons
VU Meter overlay
Overlay
Mode
Select
Buttons
Volume Control