AJA Ki PRO ULTRA Installation & Operation Manual Download Page 17

Page: 17 / 98

Ki Pro Ultra v1.2r1

www.aja.com

Red—

audio source amplitude is too hot and the signal is clipping at its signal peaks. You

should reduce the input gain at its source (camera, mixer or source equipment supplying
the signal).

Slot LED Status Indicator:

These LED 1 and 2 states indicate the status of the media slots, S1 and S2:

• LED highlighted/on: selected media

• LED not highlighted/off: inactive media, okay to eject or no media inserted

• LED flashing: recording in progress

• On power up, slot S1 is the initial selection.

Head Phone Jack:

1/8” (3.5mm) miniature stereo TRS connection for standard stereo headphones.

Connectors

The functions of Ki Pro Ultra’s inputs and outputs depend on the operational mode. Ki Pro
Ultra’s active input (the one to be recorded) is selected by front panel or web browser
control. Ki Pro Ultra’s outputs are active all the time.

Figure 3. Ki Pro Ultra Connectors

Summary of Contents for Ki PRO ULTRA



































































































Search results

Summary of Contents for Ki PRO ULTRA

Reviews:

Brands by name

Popular brands

AJA Ki PRO ULTRA, Installation & Operation Manual

Search results

Summary of Contents for Ki PRO ULTRA

Reviews:

Brands by name

Popular brands