manualshive.com logo in svg

AJA Ki PRO ULTRA, Installation & Operation Manual

Share
Download
AJA Ki PRO ULTRA Installation & Operation Manual Download Page 18

Ki Pro Ultra v1.2r1

www.aja.com

18

 

Connections

• Reference video loop for connection to a stable source of genlock video or sync

• LTC  Input  and  Output  (2x  BNC)

• HDMI v1.4b compatible input and output RGB or YCbCr

• HDMI v2.0 compatible input and output YCbCr, 4:2:0 only at 4K/UltraHD 50, 59.94, 60

• 10/100/1000 Ethernet LAN

• Dual-channel Fiber Inputs 1-4/Outputs 1-4

• HD/3G-SDI Inputs and Outputs 1-4, with 8-channel embedded audio (8x BNC)

• HD-SDI Monitor Output (1 BNC) with embedded audio.

• Balanced 8-channel Analog Audio Input via one DB-25 TASCAM pinout

• Balanced 8-channel Analog Audio Output via one DB-25 TASCAM pinout

• AES EBU 8-channel Audio Input and Output via one DB-25 TASCAM pinout

• RS-422 DB-9 Machine Control Interface (Sony 9 Pin protocol)

• Dual Mono Analog Audio Output via 2 RCA Connectors

Reference Loop

Two looping BNCs allow genlock signal input and output connections. If the genlock 
output is unused, it must be terminated using a 75-ohm termination cap. When the 
output connects to downstream equipment, the last piece of equipment in the series 
must be terminated into 75 ohms.

LTC Timecode I/O

Two BNCs provide connections to the house LTC timecode generator or source. 
Connections are high impedance. One BNC is for input and the other for output.

SDI Input and Outputs

Eight BNC connectors (four inputs and four outputs) are provided supporting HD/3G-SDI 
video and embedded 24-bit digital audio. 

HDMI Monitor Out

One HDMI connector provides for monitor output of HDMI compatible video and multi-
channel embedded audio. HDCP is not supported on the output. The HDMI output 
supports standard HDMI cables only.

HDMI Input

One HDMI Input connector provides input of HDMI video and multi-channel 

embedded audio. 

HDCP is not supported on the input.

 

The HDMI input supports 

standard HDMI cables only.

HDMI formats supported:

• 720p 50, 59.94, 60

• 1080i 25, 29.97, 30

• 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60

• 2Kx1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60

• Ultra HD (3840x2160p) 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*

• 4K (4096x2160p) 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*

NOTE: 

When using the Ki Pro Ultra HDMI connection and attaching it to any HDMI audio or video 
accessory, you must use a ferrite-beaded HDMI cable, HH-28F-06, between the HDMI output 
port of the Ki Pro Ultra and the HDMI accessory to maintain regulatory compliance.

Ethernet 

An RJ45 connector provides a 10/100/1000 Ethernet port for connecting Ki Pro Ultra 
directly to a computer or Ethernet hub or switch for connecting to a LAN. Ki Pro Ultra is 
compatible with CAT-5 straight-through or cross-over Ethernet cables, automatically 
detecting which is used. Once connected and properly configured, Ki Pro Ultra can then 
be controlled by a web browser on the LAN.

Summary of Contents for Ki PRO ULTRA



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands