FS1-X v1.1
www.aja.com
93
•
“Video Output Screen” on page 103
•
“Audio Proc Screen” on page 104
•
“Audio Output Screen” on page 105
•
“Remote Screen” on page 106
•
“Firmware Screen” on page 107
Network Pane and Network Configuration Screen
The
Network
pane on the right side of any screen lists the FS1-X systems that appear on
the network. This pane includes three additional controls:
• Hover the cursor over any system name to see its IP address.
• Right-click any system and select
Identify
to blink the system
ID
LEDs.
• Click the gear-shaped icon in the Network pane (or select
Network
from the
Menu
list on
the left side of the screen) to open the
Network Configuration
screen listing FS1-X
network settings.
The
Network Configuration
screen allows you to view and change your FS1-X's network
settings and then click
Apply
to activate them.
See
“Networking” on page 29
for
detailed setup instructions for connecting the FS1-X to a
network. Consult your network administrator about how to configure network settings.
IP Address Type
IP Address Type
determines the type of TCP/IP network configuration used by the FS1-X.
DHCP
enables the FS1-X to connect to the network DHCP server, which assigns the
IP
Address
,
Netmask
, and
Gateway
automatically.
Static
lets you set these parameters
manually.
Click the
Network
gear icon
