FS1-X v1.1
www.aja.com
21
• Video output selections
• SDI and Fiber 3G output configuration
AUDIO PROC
Displays the Audio Processor Menu Group, used to control the adjustable audio
parameters:
• Audio level, phase, and delay settings
• Embedded audio out settings
• 5.1 and 7.1 Mix Down adjustments
AUDIO OUTPUT
Displays the Audio Output Menu Group, used to control the routing of the audio sources
• Audio source selections
• Global output selection
• Output mapping controls
Control Knobs
These are the general rules of
SELECT
and
ADJUST
knob operation:
SELECT
Turning the SELECT knob performs these actions:
• Turn
SELECT
in either direction to scroll through the menus.
• Stop on a menu to enter that menu for editing.
• Turn
SELECT
within a menu to scroll through multiple parameters.
• Pause on a parameter to select it for editing. For multiple fields in a parameter, use
SELECT
to move through the fields (after pressing
Adjust
to enter field editing mode).
• Push
SELECT
momentarily to undo and restore the previous setting.
ADJUST
Turning the ADJUST knob performs these actions:
• Turn
ADJUST
to change the values of a selected parameter.
• In most cases, leaving a value in place for a moment sets that value.
• To perform special actions, such as recalling a register, push the knob to confirm the
displayed value. Display line 4 indicates such special actions.
• Some parameters having multiple fields, such as
IP Address
require you to push the
ADJUST
knob to select a field, and push again to save changes.
• Hold down the knob to reset a value to the factory default; for multiple field values,
all
fields are reset to the default
.
Table 1. SELECT and ADJUST Knob Operation Summary
Function
Knob Action
Scroll through menus.
Scroll through parameters in a multiparameter menu.
Scroll through numerals or letters in a parameter.
Turn
SELECT
backwards or forward.
Enter edit mode for a menu.
Enter edit mode for a parameter.
Enter edit mode for values, numerals, or letters.
Advance to the next value, numeral, or character to edit.
Turn and stop
SELECT
on the item to edit. (For some
multiple parameter menus, push
ADJUST
so that the
selected parameter blinks.)
Increment/decrement a value.
Turn
ADJUST
.
Coarse adjust a value.
Hold down button and turn
ADJUST
.
