manualshive.com logo in svg

AJA FS1-X, Installation & Operation Manual

Share
Download
AJA FS1-X Installation & Operation Manual Download Page 56

FS1-X v1.1

www.aja.com

56

 

7 Reference Alarm

This parameter controls how the FS1-X responds when one of the Video Processors has a 
format that is incompatible with the Reference video signal. When set to 

NORMAL,

 the 

alarm triggers if the Reference signal is not detected or is incompatible with the 
processor format. If you want the FS1-X Reference alarm to trigger only on hardware 
failures, you can suppress the alarm. Changes to this setting are automatically saved.

NOTE: 

For proper operation the Input reference signal must be stable and properly terminated using 
a 75-ohm terminator on either the unused loop connector or the last piece of downstream 
equipment to which the Ref Video is connected.

8 Hidden Menus

This parameter lets you choose whether to hide or show inactive menus.

9 Screen Saver

This parameter lets you choose the menu screen saver.

10 Display Intensity

This parameter determines the brightness of the alphanumeric display and front panel 
LEDs.

11 Fan Speed

This parameter determines the speed (and sound level) of the FS1-X's internal cooling 
fans. To prevent system damage, this setting may be overridden temporarily, and the fan 
can be set to a higher speed if the system detects very high internal temperatures. 
Changes to this setting are automatically saved 

12 Serial Number

This parameter displays the FS1-X’s unique serial number. 

13 Software Version

This parameter displays the FS1-X’s software version number.

14 Reboot

This parameter lets you reboot the FS1-X. Press and hold in both front panel knobs 
simultaneously to reboot. 

During reboot, the display shows 

[Rebooting]

, goes dark momentarily, and then shows 

the percentage of progress as the system reboots. Rebooting takes a couple of minutes.

Normal (default)

Suppress

Alarm triggers if the reference signal is not detected or is 

incompatible with the processor format.

Alarm will not be triggered by reference errors.

Hide Inactive

 (default)

Show All

Hides menus that are not in use.
Shows all menus, even those that are not in use.

On (AJA Logo) 

(default)

System Name

AJA logo screen saver is displayed
Screen saver displays the system name.

Variable

Dim or brighten the alphanumeric display and activity indicator 

LEDs in steps from 1 (dim) to 8 (brightest). 

Default: 6

Variable

Changes the fan speed in steps from 1 (slow) to 10 (fast). 

 

Default is 10.

Summary of Contents for FS1-X










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands