manualshive.com logo in svg

AJA FS1-X, Installation & Operation Manual

Share
Download
AJA FS1-X Installation & Operation Manual Download Page 73

FS1-X v1.1

www.aja.com

73

 

When Hide Inactive is on, the 

Custom Size/Position 

controls are only displayed when 

Custom Size/Pos

 is 

On

. When 

Custom Size/Pos

 is 

Off

, modified parameters are skipped in 

the menu system, and the UFC hardware is programmed for unity.

This menu is also not displayed when Active Format Description (AFD) is in control of the 
Conversion Mode. While downconverting, with Downconvert Mode set to Auto AFD, any 
values assigned for Custom Size/Pos parameters are ignored, and the menus are hidden.

14.1 Custom Size

This parameter changes the H and V size of the output picture by the specified 
percentage (%) while maintaining the current aspect ratio. 

14.2 Custom Aspect

This parameter changes the H/V aspect ratio of the output picture while maintaining the 
current V size (Aspect < 0) or H size (Aspect > 0).

14.3 Custom H Position

This parameter changes the H position of the output picture. 

14.4 Custom V Position 

This parameter changes the V position of the output picture. 

14.5 Custom Left Crop

This parameter changes the Left picture crop position. 

14.6 Custom Right Crop

This parameter changes the Right picture crop position. 

14.7 Custom Top Crop

This parameter changes the Top picture crop position.

14.8 Custom Bottom 

Crop

This parameter changes the bottom picture crop position. 

Off (default)
On

Sets this parameter and related custom size/pos parameters to off.
Enables this parameter and related custom size/position 

parameters.

100% (default)
10% to 200%

Maintains 100% picture size for the selected format.
Enables changing the picture size.

0.000 (default)
-0.500 to +0.500

Maintains the normal 100% aspect ratio for the selected format.
Enables changing the aspect ratio.

0% (default)
-100% to +100%

Maintains the normal horizontal position of the selected format.
Enables changing the horizontal position.

0% (default)
-100% to +100%

Maintains the normal 100% vertical position of the selected format.
Enables changing the vertical position.

100% (default)
+10.0% to +100.0%

Maintains the normal left side position of the selected format.
Enables changing the left side position.

100% (default)
+10.0% to +100.0%

Maintains the normal right side position of the selected format.
Enables changing the right side position.

100% (default)
+10.0% to +100.0%

Maintains the normal top position of the selected format.
Enables changing the top position.

100% (default)
+10.0% to +100.0%

Maintains the normal bottom position of the selected format.
Enables changing the bottom position.

Summary of Contents for FS1-X










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands