7
Subject to change without notice | 83018300lUK – Translation of the original operating manual | ait-deutschland GmbH
5. Fasten the start and end of the insulating jacket at
the adhesive tape applied in 1.
6. Stick second adhesive tape over the butt joint of
the insulating jacket.
7. Attach insulation cover.
8. Glue the ends of the insulating cover.
9. Seal the butt joint with additional insulating tape.
10. Attach external insulation at the base.
11. Remove packaging from the insulating rings.
12. Attach insulating rings at the connections.
13. The whole tank must be insulated vapour diffu-
sion-tight.
IMPORTANT
Do not exceed the operating pressures spec-
ified on the rating plate.
NOTE
Close off any connections not required with
appropriate plugs or caps.
For position of the connections: "Dimension-
al drawings“, from page 11, for the respective
model
