background image

5

DESCRIPTION OF THE HOT PLATES

The hob instructions must state that the appliance is not destined for use with

an external timer or a separate remote control system. 

► the  appliance  is  built  to  perform  the  following  function:  cooking  and  heating  food.  Every

other use must be considered improper.

► Never use this appliance to heat the environment.

► Do  not  attempt  to  change  the  technical  characteristics  of  the  product  because  it  can  be 

dangerous.

If you should not to use this appliance any more (or replace an old model), before disposing 
of  it,  make  it  inoperative  in  conformity  with  current  law  on  the  protection  of  health  and  the
prevention  of  environmental  pollution  by  making  its  dangerous  parts  harmless,  especially 
for children who might play on an abandoned appliance.

►  Do not touch the appliance with wet or damp hands or feet.

► Do not use the appliance barefoot.

► The  manufacturer  will  not  be  liable  for  any  damage  resulting  from  improper,  incorrect  or 

unreasonable use.

► During,  and  immediately  after  operation,  some  parts  of  the  cook  top  are  very  hot:  avoid 

touching them.

► If the ceramic glass hob is not cleaned immediately, there is a risk of residues becoming so 

encrusted that they will be impossible to remove after the hob has cooled.

Before cooking for the first time, it is necessary to clean the hob as follows: switch on the 

front  heating  elements  to  the  maximum  for  at  least  30  minutes,  heating  pans  full  of  water. 
After  30  minutes,  switch  off  the  front  heating  elements  and  switch  on  the  rear  heating 

elements  plus  the  central  heating  element,  where  applicable,  to  the  maximum.  This  is 

necessary to eliminate that “new smell” and to allow any humidity which may have formed

during the production process to evaporate. This is necessary for the correct operation of 
the electronic circuits and the control panel. If the controls do not work properly when the 
30  minutes  are  up,  there  is  still  some  humidity  inside:  leave  the  heating  elements  on  until 

all the humidity has completely evaporated, then switch off the hob.

WARNING FOR USE:

IMPORTANT!

Summary of Contents for PCZ VTC 30

























Reviews: