11
HEAT-UP FUNCTIONS
This function takes the cooking level to maximum power for a defined time.
Activate the heat-up function
After removing the control panel lock (pressing the
symbol for 2 seconds), switch on the hob by
pressing the button
for a few seconds.
Use the
button to activate the heating element required (the indicator flashes) then use the
and
buttons to adjust the cooking level to 9 (maximum) and press again the
button. When the
sensor
is pressed, the display show the power level blinking and decimal point of the display fixed on
display for 10 seconds (
Fig. A and B
), during which time the desired power level must be selected
(between 1 and 8). Confirm it using the
button (pressed initially). After this time, a beep sounds and
dot point is fixed on the display with the power of the selected heater with the same intensity. This
indicates that the heat-up function is ON.
Deactivate the heat-up function
When the heat-up function ends, a beep sounds, the dot point disappears and the heater remains at the
selected power level.
To activate the heating element press the
button, after press the
button when the heat-up function
is activated, the function is cancelled.
Power level
1
2
3
4
5
6
7
8
Time (sec.)
1’12’’
2’44’’
4’48’’
5’28’’
6’30’’
1’12’’
2’44’’
2’44’’
FIG. A
FIG. B
USE
