30
•
Position the main installation switch on “On”.
•
The display is switched on in Off.
•
Press the On-Off button (
I
) for 5 seconds until on
the display is visualized the ambient setpoint value.
•
Immediately press both buttons for the Setpoint
Control (
A - B
) until the code is visualized.
•
To switch to another parameter use the buttons for
the setpoint Control (
A - B
) .
•
Press the Eco button (
E
) to visualize the parameter
value.
•
Use the buttons for the setpoint Control (
A - B
) to
modify the value.
•
Press the Eco button (
E
) to save.
To exit from the scheduling mode:
•
Press both the buttons for the setpoint Control (
A -
B
) until the parameter code is visualized
•
If no action is performed, after 10 seconds the
thermostat will exit from the scheduling mode
By the ambient thermostat is possible to set the unit
changing some parameters.
8.3 PARAMETER MODIFICATION
To adapt the unit operating to the installation needs, it
is possible to set the operating modifying some
parameters by the ambient thermostat.
Par.
Description
P02
manual or auto setpoint enabling (onsetman)
P03
manual or automatic mode change enabling
(onmodeman)
P04
humidity setpoint in the Cool mode (seturcool)
P05
humidity setpoint in the Heat mode (seturheat)
P06
outlet temperature setpoint in COOL mode
(setoutcool)
P07
outlet temperature setpoint in HEAT mode
(setoutheat)
P09
defines the range within which the user can change
the unit set point
P10
thermostat temperature probe offset
P11
thermostat humidity probe offset
P12
Airwell Bus thermostat address
8.4 OTHER CONFIGURATIONS
8 - CONTROL
A
Ambient setpoint control button up
B
Ambient setpoint control button down
E
Eco
I
On - Off
Summary of Contents for Airflow 2020
Page 1: ...Installation and operating manual Décember 2017 ...
Page 69: ...User manual ...
