Airwell Airflow 2020 Installation And Operating Manual Download Page 12

Page: 12 / 80

The electrical panel is provided assembled on the unit side but if necessary it
can be remotely controlled up to 2 mt. away.

325

252

120

Electric panel

3 - POSITIONING

3.4 ELECTRIC PANEL

Remote positioning

•

Unscrew the fixing screws and remove the electrical panel cover.

•

Unscrew the fixing screws (M6) and remove the panel from the unit side.

•

Fix the panel using screws and screw anchors suitable for the characteristics of the used support.

•

If later it is supposed the installation of the electric elements (optional) consider that the cable to connect to the

electrical panel has a max length of 1,5 metres.

•

In this case the filter removal for cleaning can be performed either from the side or from below.

L = 2mt

3.5 ACCESS TO INTERNAL PARTS

Access from the upper side

Access from the bottom side

Summary of Contents for Airflow 2020

















































































Search results

Summary of Contents for Airflow 2020

Reviews:

Brands by name

Popular brands

Airwell Airflow 2020, Installation And Operating Manual

Search results

Summary of Contents for Airflow 2020

Reviews:

Brands by name

Popular brands