Page 75
hELi MODEL TyPE
Changing the Revolution Mixing Function High Side Percentage Value
Changing the High side percentage value affects the Revolution Mixing
function from half throttle stick to full throttle stick only. It has no effect on
the Low throttle side.
1) Press the Navigation Pad
6
to highlight H>0%.
2) Press the INC+/M1 or DEC-/M2 keys to choose the desired High
throttle side percentage value.
REVO-MIX H setting range is -150% to 150%. The default value is 0% (OFF). Using a positive or negative percentage value
will determine the direction the rudder travels when collective pitch is increased. This mix is Linear.
Changing the Revolution Mixing Function Low Side Percentage Value
Changing the Low side percentage value affects the Revolution Mixing
function from low throttle stick to half throttle stick only. It has no effect on
the High throttle side.
1) Press the Navigation Pad
6
to highlight L>0%.
2) Press the INC+/M1 or DEC-/M2 keys to choose the desired Low throttle
side percentage value.
REVO-MIX L setting range is -150% to 150%. The default value is 0% (OFF). Using a positive or negative percentage value will
determine the direction the rudder travels when collective pitch is increased. This mix is Linear.
19.gyRO (REMOTE gyRO gain cOnTROL)
The Remote Gyro Gain Control function allows you to control Heading Hold mode gain and Rate mode gain remotely. Two separate
Remote Gyro Gain Control function settings can be programmed and one can be selected at any time using the two-position
Gyro switch. For example, you might want 100% gain for aerobatic flight, but then switch to 75% gain for sport flying. In essence,
when you assign a Remote Gyro Gain Control percentage value to each of the two Remote Gyro Gain Control function settings,
you effectively have dual rates for your gyro, just like you have dual rates for your elevator, aileron, and rudder control surfaces.
Depending on the Remote Gyro Gain Control function percentage values, you can adjust the gain in either Heading Hold mode
or Rate mode. In addition, you can program a Heading Hold gain percentage value and a Rate gain percentage value separately,
then switch between the two to aid in setting up your gyro.
For greater flexibility, the Remote Gyro Gain Control function can be programmed either the same for all Flight Modes or sepa
-
rately for each of the three Flight Modes.
Transmitter F-MODE refers to the Flight Mode that the transmitter is currently operating in. Programming F-MODE refers
to the Flight Mode that you would like to change the programming for.
Programming F-MODE
Transmitter F-MODE
IMPORTANT
In order to use this feature, your gyro must support Remote Gain. For more information, and before using this
function, please refer to your gyro's Operating Guide to familiarize yourself with its setup and use.
Current Gyro Switch Selection
HELI MODEL
TYPE
