Page 15
INC+/M1
DEC-/M2
END/M3
F-MODE
BIND
The AQUILA 6 transmitter features
four Programming Keys,
a Navigation Pad and an ENTER key, all used in conjunction to
facilitate transmitter programming .
This section summarizes the functions of these features in addition to detailing the main areas
of the Multi-Function LCD.
PROgRaMMing kEyS OvERviEw anD FUncTiOnS
Increases Programming Values and is used to
select Model 1, using the Direct Model Select
function.
Decreases Programming Values and is used to
select Model 2, using the Direct Model Select
function.
END/M3
(End/Model 3)
Returns to the previous menu. Press several times to
return to the Display screen. Is also used to select
Model 3, using the Direct Model Select function.
F-MODE
(Flight Mode Select)
Cycles through the three Flight Modes during
programming. Does NOT switch between Flight
Modes during use.
INC+/M1
(Increase/Model 1)
DEC-/M2
(Decrease/Model 2)
LcD anD PROgRaMMing kEyS
Rest Default Shortcut
Pressing both keys at the same time within a
Programming Menu resets the Programming
Value to the Default value.
PROGRAMMING KEY
NAME
FUNCTION
Moving around the LCD and programming the transmitter is accomplished using the Navigation Pad, the ENTER key, and the
four Programming Keys positioned on the right half of the transmitter.
INC+/M1 Key
END/M3 Key
DEC-/M2 Key
ENTER Key
F-MODE Key
Navigation Pad
Navigation Pad
Moves the Programming Cursor Up
5
, Down
6
,
Right
4
, and Left
3
.
ENTER Key
Opens the selected menu or programming option.
Advances the cursor in the Model Name menu.
GENERAL
INC+/M1
