AIRTRONICS Sanwa Aquila-6 User Manual Download Page 29 | Manualshive

Page: 29 / 92

background image

Page 29

aERO MODEL TyPE

06.DaTa cOPy (MODEL PROgRaMMing DaTa cOPy)

The Data Copy function allows you to copy the Programming Data from one model to another model. This is convenient if you
have similar Model Types. For example, if you have two models that are similar, you can copy the Programming Data from the

first model to the second model to use as a base to start fine-tuning the programming for the second model.

Copying Model Programming Data

1) From the Display screen, press the ENTER key to display the Programming

Menus.

2) Press the Navigation Pad

56

to highlight DATA COPY, then press the

ENTER key to display the DATA COPY menu. The cursor will default to
the currently selected model, for example >01:SANWA-01 <AERO>.

3) With the cursor adjacent to the top model number, press the INC+/M1

or DEC-/M2 keys to select the model you would like to copy Programming

Data FROM. ENTER will flash in the Programming Window.

4) Press the Navigation Pad

6

to move the cursor to the bottom model

number, then press the INC+/M1 or DEC-/M2 keys to select the model
you would like to copy Programming Data TO. ENTER will continue to

flash in the Programming Window.

It's not possible to copy Programming Data from one model to the
same model. If you attempt this, ENTER will not be displayed.

5) Press the ENTER key. DATA COPY OK? will be displayed and INC+

will flash in the Programming Window.

6) Press the INC+/M1 key to Copy the model Programming Data. After ~10

seconds, the Programming Data will be copied as indicated by the
progress bar, and COMPLETE!! will be displayed in the Programming
Window. Press any key to return to the DATA COPY menu.

All model-specific Programming Data, including the Model Name will be copied to the selected model.

If you want to go back and change models or you don't want to copy the Programming Data for any reason, press the
DEC-/M2 or END/M3 keys.

07.DaTa RESET (MODEL PROgRaMMing DaTa RESET)

The

Data Reset function allows you to Reset model-specific Programming Data for any model back to the factory default settings.

As described previously, individual programming settings can be Reset to the factory default settings by pressing the INC+/M1
and DEC-/M2 keys at the same time, however, this is time consuming if you want to change all of the selected model's programming
settings back to default. Using the Data Reset function makes doing this much quicker and more accurate, since nothing will
be missed.

AERO

MODEL

TYPE

«
...
27
28
29
30
31
...
»

Summary of Contents for Sanwa Aquila-6





























































































Reviews:

No comments

Related manuals for Sanwa Aquila-6

FEPL-02 Ethernet POWERLINK

Brand: ABB Pages: 2

Brand: ABB Pages: 2

Brand: jbc Pages: 4

Brand: Hanna Instruments Pages: 88

Brand: Raypak Pages: 24

Brand: J+J Pages: 91

Brand: GBD Pages: 60

XP-9 88-IoT Series

Brand: ICP DAS USA Pages: 8

Brand: ICON Pages: 2

Brand: ICP DAS USA Pages: 4

SaunaLogic SL2 Control

Brand: Finnleo Pages: 14

Brand: Bardiani Valvole Pages: 24

Brand: HEROSE Pages: 92

Brand: SAGEMCOM Pages: 2

Brand: Instant Care Pages: 2

Soluna Remote Control

Brand: Rollei Pages: 8

Brand: TSM Pages: 2

Brand: e-survey Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands