34
Picture 22 (Attaching variables)
Now select one of the variables, i.e.
OUT 01-08
for the first 8 output bits
(solenoids), then confirm with
OK
.
Repeat this step until all physical outputs are attached to variables.
See also
chapter 3.4
how to control the solenoids of the RE-46 PROFINET.
Step 6: Activating the new configuration
Picture 23 (Activating the configuration)
In order to send the new hardware configuration to your PROFINET controller,
you have to click on the button
Activate Configuration
.
The TwinCAT System Manager will create the new variables and attach them to
the hardware. This configuration is then downloaded to your controller.
Activate configuration
Summary of Contents for RE-46
Page 6: ...6...
