AirStage UTY-RNK Series, Operating Manual

Page: 8 / 124

En-7
ON/OFF TIMER
Instructions related to heating are applicable to “HEAT PUMP MODELS” and “HEAT RECOVERY MODELS” only.
The timer function is not available depending on the unit.
To set the ON/OFF timer
Press the “ TIMER MODE /
CLOCK ADJUST” button to select
the ON timer, OFF timer or weekly
timer.
It is switched every time as shown
in the below diagram when the
button is pressed.
2
• Press the “TIMER DELETE” button to cancel the timer mode.
• The timer mode can also be canceled by changing the timer mode using the “ TIMER MODE /
CLOCK ADJUST” button.
1
No display
SU MO TU WE TH FR SA
Press the “ ” button or “ ” button to set the time.
The timer starts automatically when an unoperated 3 sec-
onds is passed after the timer setting is completed.
The amount of time until the OFF timer operates that is dis-
played on the timer display decreases as time passes.
The time can be changed by the Decrement/Increment but-
tons after the timer is once set.
From 1 to 24 hours
ex. OFF timer set for 6 hours
●
To cancel the timer mode
NON
STOP
OFF
TIMER
ON
TIMER
WEEKLY
TIMER
FILTER LAMP RESET
Some indoor unit models are equipped with a filter lamp in the indoor unit display to indicate when it is time to clean the air
filters.
Press the “ MAINTENANCE / FILTER RESET” button for 2 seconds or more. The indoor unit filter lamp will go off and the
filter display will disappear.
Decrement Increment
9373329169-03_OM_en.p65 5/22/09, 7:30 PM 7