Airspan ProST 4.9, Hardware Installation Manual

Page: 14 / 56

10
GETTING STARTED
Before installing your ProST, read the following topics to ensure that:
No items are missing from the package
Minimum computer requirements are fulfilled
You have the required installation tools
Radio Site planning has been performed
Package Contents
Examine the AS.MAX shipping container. If you notice any damage, or missing items as listed in
the Packing List, immediately notify the carrier that delivered the unit and contact an Airspan
representative.
The ProST kit should contain the following items:
ProST Radio
DB15-to-RJ45 adapter for plugging into the ProST's 15-pin D-type port
CAT 5 cable
Wall-mounting kit:
o
Mounting bracket
o
2 x M10 hex head screws
o
2 x M10 hex nuts
o
2 x M10 plain washers
o
2 x M10 spring lock washers
Note: The standard ProST kit does not include pole-mounting accessories. For pricing
and ordering of pole-mounting accessories, please contact your nearest Airspan dealer.
Note: The standard ProST kit does not include the SDA-1 Type II adapter. For pricing
and ordering of the SDA-1 Type II adapter, please contact your nearest Airspan dealer.
Minimum PC Requirements
Ensure that your computer provides an Ethernet interface such as a Network Interface Card
(that provides an RJ-45 port).
Note: Only subscriber terminal equipment (e.g. computer modem port) that is
designed for full compliance with TNV-1 telecommunication network can be connected to
the SDA-1. Warranty of Airspan's equipment shall be made void if the SDA-1 is connected
to a computer that is not compliant with TNV-1.
Required Tools
The following tools are required to install the ProST unit:
Crimping tool for crimping CAT-5 cables to RJ-45 connectors
Cable stripping tool
Wall Mounting:
o
drill bits
o
4 x wall anchors
o
4 x screws
o
Philips head screwdriver
o
Flat-blade screwdriver
o
A/F open ended spanner
Crimping tool for crimping RF cable to N-type connector (only relevant when
implementing external antenna)