Mounting
25
2.
Drill holes for each hole that you marked in the step above.
3.
Insert wall anchors (supplied) into each of the drilled holes.
4.
Insert the 9-inch screws (supplied) into the wall anchors. Ensure at least 2 mm of the
screw is exposed to allow insertion into the SDA-4S mounting holes.
5.
Hold the SDA-4S with both hands, and align the entrance to the two mounting hooks
with the screws. Slide the screws into the mounting hooks, by lowering the SDA-4S onto the
screws.
Note:
For safety, both mounting hooks must be utilized when mounting the unit.
Note:
The SDA-4S is supplied with a 1-metre AC power lead assembly. Therefore,
ensure the unit is mounted within reachable distance to the customer's mains power
outlet.
Note:
The maximum cable run between SDA-4S and ProST is 100 meters. Therefore,
ensure the unit is mounted within reachable distance to the ProST.
Summary of Contents for ProST 4.9
