17
MOUNTING
Warning:
ProST is an outdoor radio unit, and therefore, must only be mounted
outdoors.
Warning:
Mount the ProST in an orientation such that its 15-pin D-type port
(located on the front panel) faces downwards. This prevents rain water from settling on
the port, and thereby, avoiding damage to the unit such as corrosion and electrical short-
circuiting.
ProST can be
wall mounted
or
pole mounted
. For either mounting methods, the ProST provides
mounting holes (displayed in the figure below), molded into its bottom panel for attaching the
mounting brackets.
Note:
The standard ProST kit provides wall-mounting brackets. If you want to pole
mount the ProST, contact your nearest Airspan distributor for pricing and ordering of
pole-mounting brackets.
Note:
A minimum of 3-meter separation is required between mounted ProSTs and
existing customer radio equipment when transmitting on different sectors (see figure
below). However, only a 1-meter separation is required between ProSTs when on the
same sector and transmitting to the same base station radio without requiring shielding.
The figure below illustrates the minimum separation between mounted ProST's when
transmitting on different sectors:
Wall Mounting
ProST wall mounting consists of two main stages:
Attaching the mounting bracket to the ProST's mounting holes
Attaching the mounting bracket (already attached to the ProST ) to the wall (or pole)
To wall mount the ProST:
Summary of Contents for ProST 4.9
